 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| P6KE6V8(C)A - P6KE440(C)A Transient Voltage Suppressors P6KE6V8(C)A - P6KE440(C)A Features * * * * * Glass passivated junction. 600W Peak Pulse Power capability at 1.0 ms. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. Typical IR less than 1.0 A above 10V. DO-15 COLOR BAND DENOTES CATHODE ON UNIDIRECTIONAL DEVICES ONLY. NO COLOR BAND ON BIDIRECTIONAL DEVICES. * DEVICES FOR BIPOLAR APPLICATIONS - Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions. 600 Watt Transient Voltage Suppressors Absolute Maximum Ratings* Symbol PPPM IPPM PD IFSM Tstg TJ Peak Pulse Current Power Dissipation .375 " lead length @ TA = 75C Non-repetitive Peak Forward Surge Current superimposed on rated load (JEDEC method) Storage Temperature Range Operating Junction Temperature TA = 25C unless otherwise noted Parameter Peak Pulse Power Dissipation at TP=1ms Value 600 see table 5.0 (Note 1) Units W A W A C C 100 -65 to +175 + 175 *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Note 1: Measured on 8.3 ms single half-sine wave; Duty cycle = 4 pulses per minute maximum. 2002 Fairchild Semiconductor Corporation P6KE6V8(C)A - P6KE440(C)A, Rev. D P6KE6V8(C)A - P6KE440(C)A Transient Voltage Suppressors (continued) Electrical Characteristics Uni-directional Bi-directional (C) Device P6KE6V8(C)A P6KE7V5(C)A P6KE8V2(C)A P6KE9V1(C)A P6KE10(C)A P6KE11(C)A P6KE12(C)A P6KE13(C)A P6KE15(C)A P6KE16(C)A P6KE18(C)A P6KE20(C)A P6KE22(C)A P6KE24(C)A P6KE27(C)A P6KE30(C)A P6KE33(C)A P6KE36(C)A P6KE39(C)A P6KE43(C)A P6KE47(C)A P6KE51(C)A P6KE56(C)A P6KE62(C)A P6KE68(C)A P6KE75(C)A P6KE82(C)A P6KE91(C)A P6KE100(C)A P6KE110(C)A P6KE120(C)A P6KE130(C)A P6KE150(C)A P6KE160(C)A P6KE170(C)A P6KE180(C)A P6KE200(C)A P6KE220(C)A P6KE250(C)A P6KE300(C)A P6KE350(C)A P6KE400(C)A P6KE440(C)A Reverse Stand-off Voltage VRWM (V) 5.80 6.40 7.02 7.78 8.55 9.4 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53.0 58.1 64.1 70.1 77.8 85.5 94.0 102.0 111.0 128.0 136.0 145.0 154.0 171.0 185.0 214.0 256.0 300.0 342.0 376.0 TA = 25C unless otherwise noted Breakdown Voltage VBR (V) min 6.45 7.13 7.79 8.65 9.50 10.5 11.4 12.4 14.3 15.2 17.1 19.0 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95.0 105.0 114.0 124.0 143.0 152.0 162.0 171.0 190.0 209.0 237.0 285.0 332.0 380.0 418.0 Max 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21.0 23.1 25.2 28.4 31.5 34.7 37.8 41.0 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105.0 116.0 126.0 137.0 158.0 168.0 179.0 189.0 210.0 231.0 263.0 315.0 368.0 420.0 462.0 Test Current IT(mA) 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Clamping Voltage @IPPM VC(V) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 Peak Pulse Current IPPM (A) 57.1 53.1 50.0 45.0 41.0 38.0 36.0 33.0 28.0 27.0 24.0 22.0 20.0 18.1 16.0 14.5 13.2 12.0 11.2 10.1 9.3 8.6 7.8 7.1 6.5 5.8 5.3 4.8 4.4 4.0 3.6 3.4 2.9 2.7 2.6 2.4 2.2 1.9 1.8 1.5 1.3 1.1 1.0 Reverse Leakage VRWM IR (uA)* 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 * For bidirectional parts with VRWM<10V, the IR max limit is doubled. P6KE6V8(C)A - P6KE440(C)A, Rev. D P6KE6V8(C)A - P6KE440(C)A Transient Voltage Suppressors (continued) Typical Characteristics 100 100 TA = 25 C 75 Pulse Power [%] Pulse Power [kW] 10 50 1 25 0.1 0.0001 0 0.001 0.01 0.1 Pulse Width [ms] 1 10 0 25 50 75 100 125 150 Ambient Temperature [C] 175 200 Figure 1. Peak Pulse Power Rating Curve Figure 2. Pulse Derating Curve 150 tf = 10sec Total Capacitance, CT [pF] Peak Pulse Current [%] 100 Peak Value Ippm T A = 25 C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of Ipp 6000 4000 2000 1000 500 200 100 50 20 Measured at Stand-Off Voltage (V mw) T A = 25 C f = 1.0 MHz Visg = 50m Vp-p Measured at Zero Bias Half Value-Ipp 2 50 10/1000sec Waveform as Defined by R.E.A. td 0 e-kt 0 1 2 Time [ms] 3 4 10 1 5 10 50 Reverse Voltage, VR [V] 100 200 Figure 3. Pulse Waveform Figure 4. Total Capacitance - Unidirectional Peak Forward Surge Current, IFSM [A] 5 200 T A = T Amax 8.3ms Single Half Sine-Wave JEDEC Method Power Dissipation [W] 3.75 100 2.5 50 1.25 20 0 0 25 50 75 100 125 150 Lead Temperature [C] 175 200 10 1 2 Figure 5. Steady State Power Derating Curve 5 10 20 Number of Cycles at 60Hz 50 100 Figure 6. Non-Repetitive Surge Current P6KE6V8(C)A - P6KE440(C)A, Rev. D |
Price & Availability of P6KE8V2A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |